Gear care

6 min read

How to care for ASOLO leather boots

By Kateřina Kolečková

1. Cleaning your boots

  • Ensure your boots dry properly after every use.
  • Before cleaning your boots, remove any loose parts and laces. This makes it easier to reach hard-to-access areas and corners, such as the tongue and the gusset of the boot.
  • If your boots are heavily soiled, clean them first with a brush and warm water to remove coarse dirt. Afterwards, you can apply protective treatments.
  • Always use a specialised product to clean and protect your boots.
  • In areas with a high calcium content, we recommend using distilled water for cleaning.

2. After cleaning

  • Once you have cleaned your boots, apply a waterproofing spray. Apply it to the boots while they are still slightly damp.
  • Why? Damp leather boots have widely open pores, allowing the waterproofing agent to penetrate deep into the leather.
  • We recommend applying a waterproofing spray regularly to prevent water and dirt from penetrating the boot's upper material.
  • This waterproofing “ritual” is particularly important because repeatedly soaking already wet boots causes the material to lose its breathability. Losing this property affects the boot's ability to regulate the temperature of your foot.
  • Always bear in mind that a waterproofing treatment takes at least 24 hours to become fully effective.

3. Regular care

  • Regardless of how often you use your boots, always clean them regularly with specialised products for shoe care. If you use your boots frequently and in extremely wet conditions, it is essential to use a wax boot paste or cream – even on boots with a GORE-TEX® membrane.
  • A leather boot that is soaked with water and looks swollen must be adequately treated to preserve the properties of its material.
  • If you do not give your leather boots enough care, the leather will dry out, become brittle, and pull at the seams. Your boots will be irreversibly damaged.

To prevent this, wipe your boots with a cloth soaked in a care product and polish them using a brush. Do not be afraid to use a hairdryer with warm air to help the product penetrate the leather better. (Heat improves the cream's ability to penetrate the pores of the leather.)

  • We do not recommend using oils and other lubricants.

4. Where to store your boots?

  • Leather boots are best kept in a boot bag or a box, in a dry and well-ventilated place.
  • If your boots are still damp, you can stuff them with newspaper to help absorb the moisture and retain their desired shape.
  • Never store your boots in a damp room. They could start to deform.
  • Try to avoid storing them in a hot place, e.g. in direct sunlight or near a radiator, and absolutely never leave your favourite leather boots in the boot of a hot car.

5. Further tips, tricks, and advice

  • Newly purchased boots do not require any additional care before their first use.
  • Incorrect care of the leather or membrane can cause the material to stop functioning.

Never wash your boots in a washing machine. The mechanics of the wash cycle, combined with high temperatures, can wash out the leather pigments, damage the materials, and loosen the glue. You can irreversibly ruin your boots this way.

  • Nubuck or suede leather boots may darken after applying wax. You can partially correct this condition with a brush. However, you will never completely restore their original appearance. To minimise the change in appearance, you can use a liquid product for shoe care.
  • Your boots should be aired after every use. Do not forget to open the lacing sufficiently while airing them out. Remember this process even during multi-day treks.
  • Never leave your boots to dry next to any heater or near an oven – wet leather burns very well. Bear in mind that it is not just the leather itself, but also the metal parts of the boot. These can be pulled out of place while drying near a direct heat source.
  • Try to avoid acids, petrol, or even manure. All these substances negatively affect the materials, and the footwear can begin to degrade. If you do come into contact with these substances, make sure to clean your boots thoroughly afterwards.

Hydrolysis and midsole lifespan

What does hydrolysis have to do with Asolo boots?

Hydrolysis is the chemical breakdown of a compound due to a reaction with water. In our case, we are talking about polyurethane (PU), which is used to manufacture the midsole (the part of the shoe in the middle of the boot, between the sole and the upper / insole).

This midsole can gradually absorb moisture and degrade. The polyurethane becomes harder, more porous, and at a certain point, it will start to crumble.

In extreme cases, the sole can completely disintegrate and fall off your boots. Yes, that is right :-D

Most high-quality mountain and trekking boot manufacturers use ester-based PU because it is the most suitable material – despite hydrolysis.

Even so, all boot manufacturers have to deal with the problem of polyurethane ageing.

Please note that hydrolysis is not visible from the outside, because the damage occurs from the inside and even new-looking boots can have a crumbling structure.

Therefore, we strongly recommend taking those old boots on a test trek before you pack them for a multi-day hike. Especially if the boots were stored in an attic or a cellar, for example :-)

How to beat hydrolysis?

With proper storage.

  • Store your boots in a dry and well-ventilated place.
  • Keep your boots away from heat.
  • Clean your boots regularly.
  • Clean your boots at the end of your hike.
  • If you find that your boots are affected by hydrolysis, all is not lost. Asolo footwear is made with a cemented construction and can easily be fitted with a new sole.

What is the cemented construction method?

The ASOLO company manufactures footwear using the cemented construction method. Cemented construction is a traditional and complex shoemaking technique where the boot's upper is shaped over the insole before the sole is attached with adhesive (cement) directly to the upper. This technique requires a lot of experience in the craft. The result is a durable boot with excellent stability and a long lifespan.

A sole attached this way has the advantage that it can be changed over and over again. This means that if the boot is in a reasonable condition, the old sole can be removed and a new one attached in its place, directly to the boot's upper.

Have your boots been hit by hydrolysis, but you do not want to give them up?

Try to

  • visit a really skilled cobbler,
  • take your boots to an authorised Asolo service centre,
  • contact us.
Back to blog
Free deliveryover €100 · dispatched from a European warehouse
Easy returns30 days to return
Secure paymentSecure shopping