Pinguin

Tent Pinguin Summit 2 green

€231.54
In stock

inc. VAT, free delivery

Estimated delivery by Mon, 30/11We’ll deliver your whole order in one go

In stock

You have free delivery!

Dispatched from a European warehouse

Fast dispatch

We help you choose

Real people, real experience

Product description

Tent Pinguin Summit 2 green

A spacious and lightweight semi-geodesic tent with very good wind stability

  • Suitable for mountaineering and hiking.
  • A rigid structure with three poles and four crossing points.
  • It features an exceptionally spacious porch and a low weight.
  • The tent can be pitched without the inner tent.
  • The flysheet is made of Polyester with a polyurethane coating, guaranteeing a hydrostatic head of 4 000mm.
  • The seams and loops are taped with a special tape. Loops sewn onto already taped seams are also taped on both sides.
  • The groundsheet is made of Nylon with a Polyurethane coating, providing a hydrostatic head of 10 000mm.
  • The poles consist of duralumin segments (7001 T6) with a diameter of 9.5mm.
  • Inner/outer tent height 115/120 cm.
  • Two ventilation windows.

Description

The tent is double-skin and consists of an inner tent and an outer cover – the flysheet. The inner tent has a trapezoidal floor plan with one entrance. The tent features a spacious porch with two entrances. The porch can be used to store gear, or it can provide shelter from the wind when cooking.

Concept

The tent is based on a principle where the pole structure threaded through sleeves is on the outside of the flysheet. The flysheet and the inner tent (which is suspended under the flysheet) are pitched simultaneously after threading the poles through the sleeves. The advantage of this method is that the inner tent can be detached from the flysheet and the flysheet can then be pitched independently. This gives you a single-skin tent without a groundsheet.

Ventilation

This is located at the top of the flysheet dome. The hoods of the ventilation windows are shaped so that they are not blown shut by the wind; if necessary, they can be closed with Velcro fasteners. This prevents leaks even during rain with strong winds.

Pitching the Tent

Thread the structural poles through the sleeves on the outside of the flysheet and insert the ends of the poles into the brass eyelets on the loops at the bottom edge of the flysheet. Then fasten the buckles on the straps near the ground inside the tent, which pitches the flysheet. Fasten the inner tent into the loops on the inside of the flysheet. Anchor the pitched tent with pegs and guy lines and tighten it with the plastic buckles.

Specifications

Weight
3.6 kg
Colour
Green
EAN
8592638116243
Flysheet material
Polyester, PU coating 4 000 mm H2O, UV protection
Groundsheet
Nylon, PU coating, 10 000 mm hydrostatic head
Groundsheet hydrostatic head
10000
Groundsheet material
Nylon
Inner/outer construction
External
Number of people
For 2 people
Pole material
Aluminium
Poles
Aluminium 7001 T6, 3 poles ø 9.5 mm
Tent construction
Double-skin freestanding tent with outer poles
Tent hydrostatic head
4000
Tent pack size
52x15
Features
Number of bedrooms
Economic operator

Activent 365 s.r.o.

Address
Příkop 27/2a, 602 00 Brno 2, CZ
Phone
+420 731 501 634
Safety information for this product

Hesitating about choosing Tent Pinguin Summit 2 green?

We can advise you based on your intended use, terrain and conditions. Send us a message — we have hands-on outdoor experience.

Ask an expert

Get advice

Similar products