Tibloc
The structurally simplest ascender, manufactured by the French company Petzl. Suitable as a backup ascender for unexpected situations. It is made from a single piece of metal. The role of the ascender's cam is played by a karabiner, which is inserted into the ascender and which the climber also uses to attach themselves to it. You must only grab and pull on this karabiner. The Tibloc is designed for use on ropes with a diameter of 9 – 11 mm; it generally works on an 8 mm rope as well, but the manufacturer no longer recommends this. It may slip on thinner ropes. In addition to its function as an ascender for ascending a rope, you can use the Tibloc as a self-locking pulley. You will use this function most when hauling various loads, rucksacks, etc. This function is also highly effective in various rescue methods aimed at hauling an injured person up, whether to a belay station during rock climbing or during a crevasse rescue. However, when using the Tibloc as a self-locking pulley, the rope must be routed through the karabiner. You must realise that the load-bearing component is the karabiner itself, and the Tibloc is merely an auxiliary device that blocks the rope. The actual pulley is the karabiner, not the Tibloc, which does not have such a high load capacity.
