Letter S

Static ropes

is an incorrect term for a low stretch rope, which belongs to the category of textile ropes used in climbing. Compared to climbing (dynamic) ropes, static ropes feature reduced elongation, which is required for rope access work, rescue operations, and caving.

According to ČSN EN 1891, these ropes are designated as “Low stretch kernmantel ropes”. Based on this standard, they are divided into two types. A Type A rope has a required minimum strength of 22 kN and is designed for activities at height and suspended over a free drop, for rescue, caving, and similar activities. A Type B rope has lower specifications, e.g. its minimum strength is 18 kN. Type B ropes are mostly of smaller diameters, require greater care during use, and their application is mainly where rope weight is a limiting factor (e.g. expeditions).

Low stretch ropes are manufactured in diameters from 8.5 mm to 16 mm, mainly from polyamide, polyester, aromatic polyamide (Kevlar), oriented polyethylene, and Vectran. An important requirement of the standard is that they must be made from a material with a melting point higher than 195 °C, so polyethylene and polypropylene, which do not meet this requirement, cannot be used for their production.

In terms of dynamic performance, the ropes are tested using a 2 m test sample length, a fall factor of f=1, and a test mass of 100 kg for a Type A rope and 80 kg for a Type B rope. The rope must withstand 5 test falls without breaking.

An important parameter of the rope is its elongation - e.g. for a Type A rope, when applying a test mass of 150 kg (previous pre-tension of 50 kg), the elongation must not exceed 5%.

The standard also defines the sheath slippage relative to the core, knotability (flexibility), and other parameters.

Inside the rope is a marker tape running the entire length of the rope, indicating the manufacturer's designation, rope type and standard number, year of manufacture in digits, and the material from which the rope is made. These details are at a maximum distance of 1 m from each other and are important for inspection.

Back to glossary