Hydrophilic, non-porous membrane
This is a continuous, water-absorbing membrane without through-pores. Water is transported through the membrane by the following mechanism – water molecules are adsorbed onto the inner surface of the membrane, and based on the principle of solid-state diffusion and the concentration difference between the inside and outside of the membrane, they are transported to the outer surface, where they evaporate. Excellent waterproofing is ensured, just like with a plastic bag, by the continuous membrane physically blocking the passage of liquid water. This category includes almost all PU (polyurethane) membranes and therefore the vast majority of known membranes, including today's Gore-Tex, which uses a Teflon membrane with a PU layer. The PU layer protects the Teflon against dirt and damage.
The disadvantage of a continuous, non-porous PU membrane is that the rate of diffusion is inversely proportional to the membrane's thickness. So, to ensure sufficiently fast moisture transport to the outside, the membrane must be very thin, and a very thin membrane is easily damaged. That is why a protective fabric must be laminated onto both sides – which explains the 3-layer laminate and the higher weight of these fabrics. In a 2.5-layer laminate (Gore-Tex Pac-Lite), the weight was successfully reduced by eliminating the inner protective fabric and applying a protective carbon layer instead.
