Grigri
The Grigri belay device belongs to the group of so-called semi-automatic belay devices. The braking effect on the rope is exerted in certain situations by a mechanism built into the device. In the case of the Grigri, it is a pivoting metal cam which, upon a strong pull on the rope exiting the device towards the climber, rotates and presses the rope against the opposite metal surface. The pinched rope is thus prevented from sliding. The belayer then releases the locked rope using a control handle. By pulling the handle, the pivoting cam tilts away, and the rope is freed to slide again. While releasing the rope with the handle, the belayer must hold the brake side of the rope below the Grigri with their hand! The Grigri belay device is designed for belaying with a single rope in a diameter range of 10 to 11 mm. Belaying with a Grigri acts as a static belay, i.e. dynamic absorption through rope slippage in the belay device is minimal to none. When catching a fall with a fall factor f = 1, an impact force of roughly 4 to 5.5 kN is reached with the Grigri. Therefore, due to its properties, the Grigri is intended for use at sport crags with bolted protection, or at artificial climbing walls. You can use the Grigri to belay both a lead climber and a second, and you can of course also abseil with this belay device. However, abseiling is only possible on a single strand of rope.
