The intuitive and easy-to-use BE UP belay device features a modular braking system that optimises braking with all types of ropes and allows for auto-blocking and independent belaying of two seconds.
Parameters, certification, and legislation
- For use with half or twin dynamic ropes with a diameter of 7.3–9.0 mm.
- For use with a single dynamic rope with a diameter of 8.5–10.5 mm.
- The body of the belay device is hot-forged from a light alloy – lightweight and extremely functional for the best performance.
- The body includes an attachment hole for anchoring to the belay station when belaying a second in GUIDE mode.
- The belay device includes a plastic-coated steel cable that eliminates excessive movement of the device during belaying and ensures easier handling so you don't accidentally drop it.
- Weight of the belay device alone: 85 g
- REGISTERED DESIGN.
- Complies with EN 15151-2:2012 type 4
- UIAA
- Quality control 100%
- Made in Italy
BE UP features
- Effective belaying of the leader. The specific shape of the BE UP belay device allows smooth rope payout and doesn't jam, even when you need to pay it out quickly, e.g. when your climbing partner is clipping protection.
- When belaying a leader on a multi-pitch route using double ropes, the BE UP allows you to pay out one rope while the other is locked.
- Effective modular rope braking: the “V” shaped notches are specially designed to guarantee better braking control when arresting a fall, abseiling, or bringing up seconds.
- Allows independent bringing up of one or two seconds. If a second falls, the belay device automatically locks. When bringing up two seconds, you can continue bringing up one even if the other is hanging on a rope locked in the device.
- The BE UP is equipped with a release hole, which is used to release the rope or to lower a second hanging on the rope. To release the rope, simply lift the belay device using an HMS carabiner inserted into the release hole.
- Allows a quick change from guide mode for belaying a second to lead belay mode.
- When abseiling, the ropes remain separate, do not twist, and the “V” shaped notches allow you to easily control the abseil speed.
TONDO SGL HC carabiner
The BE UP is supplied together with a robust TONDO SGL HC HMS carabiner with wear-resistant anodising and the ACL system (a steel spring preventing the carabiner from twisting), which prevents the carabiner from spinning and potentially overloading its minor axis.
Carabiner features:
- Spacious enough to attach a belay device.
- Hot-forged for maximum strength and durability.
- Shaped profile for the best possible weight-to-strength ratio of the carabiner.
- Fully oval profile in areas where the carabiner comes into contact with the rope for better lifespan.
- The nose of the carabiner is catch-free to prevent snagging when clipping and unclipping.
- ACL system – a steel spring allowing the carabiner to be clipped into the belay loop of the harness, which fixes its position and prevents cross-loading of the carabiner.
Carabiner parameters:
- Major axis strength: 24 kN
- Open gate strength: 7 kN
- Weight: 75 g
- Gate opening: 22 mm
- ACL
Carabiner certification and legislation:
- EN 12275:2013-H
- EN 362:2004-A/T
- CE 0333
- UIAA
- Individually tested 100%
- Made in Italy